Stands
ST-AS-X | New Motorized XYZ Free Angle Stand
High-precision inclination* stand with antivibration and full motorization
Motorized XY axes: 100 x 100 mm
Step size: 0.1 micrometer
Sample plate: 200 x 200 mm
Suitable for NPS + HIROX setup
Compatible with motorized and manual Z axis blocks
Compatible with backlight transmitted illumination function
Also available with higher precision motorized XY stages, with 200 x 100 mm motorized XY stage as well as manual XY stage
*Possibility to tilt the Z pole to 135°!
ST-AS | Motorized XYZ-Axis Free Angle Stand
Hirox created a completely new inclination stand featuring multiple integrated sensors and a high precision 80 mm motorized Z movement, providing the highest level of accuracy for various applications.
The XY stage can be manual or motorized (50x50mm or 100x100mm) for automatic XYZ acquisition. The stand also integrates built-in transmitted illumination, controlled by the HRX-01 software, increasing the observations
capabilities, as well as antivibration feet for improved stability. A rotary plate can be added to spin the sample in any direction!
Thanks to various sensors – including height and angle – the ST-AS stand truly supports the users, offering intelligent & stress-free observation.
For a maximum ease-of-use, all 4 axes (X-Y-Z-R) can be controlled with the wireless 3D-mouse controller
ST-B500 | Bridge Stand
Special-Made stand setup to inspect samples from above
Motorized X axis (top): 500 mm
Motorized Y axis (bottom): 500 mm
Step size: 0,2 micrometer
Base plate: 1200 x 900 x 58 mm
Sample plate: 600 x 600 mm
Length inside the bridge: no limit
NPS smallest height: 1 micrometer
Maximum load on Y axis: 15 kg
Maximum XY moving speed: 10 mm / sec
Compatible with FB-E motorized and manual Z axis block as well as “Z-only” axis
Also available with XY axes: 100, 300, 800, 1000 mm
SP-ST-BT | Special Bridge Stands
Special-Made stand setup to inspect samples from above with sliders to reach area of interest. Perfect to suit a large table!
Motorized X axis (top): 200 mm
Motorized Y axis (bottom): 200 mm
Step size: 0,2 micrometer
Length inside the bridge: no limit
NPS smallest height: 1 micrometer
Maximum XY moving speed: 10 mm / sec
Compatible with FB-E motorized and manual Z axis block as well as “Z-only” axis
Also available with XY axes: 100, 300, 500 800, 1000 mm
ST-T500 | Horizontal T-Stand
Special made horizontal motorized stand for inspection of vertical objects with counterweight:
Motorized X axis (bottom): 500 mm
Motorized Y axis (moving up and down): 500 mm
Step size: 0,2 micrometer
Maximum XY moving speed: 10 mm / sec
Compatible with FB-E motorized and manual Z-axis block as well as “Z-only axis”
Motorized Z axis: up to 80mm
Also available with XY axes: 100, 200, 300, 1000 mm
ST-HW-1 | Table Flexible Arm Stand
High-precision table stand with adjustable column and flexible arm.
High quality and stable stand for inspection of horizontal, flat, vertical and inclined objects.
Easy to assemble/disassemble/transport!
Includes manual XY movement with handle
Includes 32-mm pole for Hirox Z axis
ST-TS-W | Flexible Arm Stand on wheels
High-precision large Stand with adjustable horizontal Arm.
On wheels or attached to a table, it facilitates observations of large-size objects: L-shape or rotational ball-head extension for 360° free angle lens position. Adjustable columns for any alternative work. Carrying-case and more options.
Time to assemble/disassemble = one minute!
Working area: from 650 mm to 2000 mm
Max distance from Pillar center: 1500 mm
Weight: 50 kg
Auto Z-02 | Contact Stand
New high precision stand with Z-axis specially designed for contact observation
Motorized movements: 30mm with 0.05µm (50nm) steps
Including manual micrometric XY mouvements
It’s perfect to inspect and make 2D/3D measurements on flat or cylindrical surfaces, for examples plates and tubes.
It’s a stable & portable stand and is very easy to use.